[scratch build] Project AXE-R

[Predat0r]

Go to assemble

hand-made brushed aluminum

mounting radiators, reservoire and fans

Pozdrav,
cime i kako poliras aluminijumske delove?Hvala u napred.

 

[Uros11250]

Ja znam da se za prohrom ili ti inox koristi brusilica samo menjas nastavke npr za brusenje koristis valjak ,za poliranje stavljas onaj "kamen" koji je od tkanine i koristis pastu za poliranje... pre toga sve moras da pripremis metal treba da obrusis smirglom za ti isto imas kamen a za finije imas valjak na koji stavljas smirgle...Verujem da je i za aluminijum isto


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[neSSa]

Haj da budemo precizniji, ja ne poliram vec "cesljam" alu, btw za poliranje alu postoje spec paste i dodaci u vidu valjkova za brusilicu, stim sto cak i uz max odradjenu stvar ne moze se dobiti utisak nikla..

 

[neSSa]

Assembling, day two

 

[neSSa]

Day 3, RGB

 

[Uros11250]

Nesso ako ne bude bio video ima da se naljutim


Sent from my iPhone using Tapatalk

 

[Babadzonka]

Snima Dule garant

 

[neSSa]

Day 4, 5 days left

 

[dr1pac]

Oduševljen sam činjenicom da svaki kabel ima svoju rupu, ludački dobra ideja i realizacija

P.S. Ne daj bože da bude moralo napajanje da se menja, na.ebaste

 

[neSSa]

Oduševljen sam činjenicom da svaki kabel ima svoju rupu, ludački dobra ideja i realizacija

P.S. Ne daj bože da bude moralo napajanje da se menja, na.ebaste

Hvala drago mi je da ti se dopada, ali sto se tice PSU, gresis, sve je modularno, bukvalno skinem donju masku pocupam sve kablove koji su tipski za ovo kuciste i odpozadi izvucem napajanje, 5min posla

PS zar me stvarno toliko potcenjujes hahaha ?

 

[nasteezy]

Jel ti mene zezas da bojite cetkicom xpg logo na hladnjaku od rama i ovu liniju iznad?
Brateeee, koja posvecenost za detaljima..no koment..bruka

 

[dr1pac]

Hvala drago mi je da ti se dopada, ali sto se tice PSU, gresis, sve je modularno, bukvalno skinem donju masku pocupam sve kablove koji su tipski za ovo kuciste i odpozadi izvucem napajanje, 5min posla

PS zar me stvarno toliko potcenjujes hahaha ?

Naravno da je modularno, znam to, nego kažem to više iz šale pošto je očigledno da kablovi napolje neće moći bez skidanja konektora. Zato me i oduševilo kako ste odradili, to naknadno stavljanje konektora, ta posvećenost detaljima... hbt, pa svaki kabel ima svoju rupu

 

[neSSa]

Day 5, 4 days left, me and my crew today finished tube in the backstage

 

[Uros11250]

Da li ce biti neka prezentacija da se vidi uzivo kuciste?


Sent from my iPhone using Tapatalk

 

[neSSa]

Da li ce biti neka prezentacija da se vidi uzivo kuciste?


Sent from my iPhone using Tapatalk

Naravno, to se ne dovodi u pitanje

 

[neSSa]

3 days left, a lot of job is done, system work

 

[neSSa]

The project is finished and ready for photo shooting

 

[neSSa]

Project is finished! Enjoy

CMWS2018: https://www.cmws.global/blog/axe-r-project-by-nessa


Two years ago today, AXE-R was project was initially conceived as a drawing, and today, it was finalized into the state-of-the-art full-aluminium chassis, combining the latest technology and the stunning hexagonal design.

AXE-R is divided into two sections - the cooling segment and the hardware section. The cooling segment is also divided in two loops, for CPU and GPU, which greatly enhances the performance efficiency of the components. This time, with the help from my brother Nemanja, and my friend Dušan, such a vast project was so much easier to take on, whilst providing handbrushed aluminium, as well as the nickel in the fittings, waterblocks, and much more to achieve the Premium look. The AXE-R case posesses an Arduino unit that measures the humidity and temperature, during which it's programmed to open the lid and circulate air throughout the chassis, should the overheating of the components occur. Therefore, we can say that AXE-R, regardless of the latest hardware that's implemented, is a true smart case.

Hardware which I've used in this project is:

Case: Custom AXE-R case by neSSa
CPU: AMD Treadripper 1950x
RAM: ADATA XPG 8x8Gb DDR4 RGB
SSD: XPG SX8000 PCIe Gen3x4 M.2
MB: Gigabyte AORUS X399 Gaming 7
GPU: Gigabyte Vega 64 CF
PSU: Cooler Master V1200 Platinum and CM 120 AP RGB fans
Cooling: EKWB full custom dual-loop water cooling system

Thank you all for support!

BR neSSa

 

[Uros11250]

Project is finished! Enjoy

CMWS2018: https://www.cmws.global/blog/axe-r-project-by-nessa


Two years ago today, AXE-R was project was initially conceived as a drawing, and today, it was finalized into the state-of-the-art full-aluminium chassis, combining the latest technology and the stunning hexagonal design.

AXE-R is divided into two sections - the cooling segment and the hardware section. The cooling segment is also divided in two loops, for CPU and GPU, which greatly enhances the performance efficiency of the components. This time, with the help from my brother Nemanja, and my friend Dušan, such a vast project was so much easier to take on, whilst providing handbrushed aluminium, as well as the nickel in the fittings, waterblocks, and much more to achieve the Premium look. The AXE-R case posesses an Arduino unit that measures the humidity and temperature, during which it's programmed to open the lid and circulate air throughout the chassis, should the overheating of the components occur. Therefore, we can say that AXE-R, regardless of the latest hardware that's implemented, is a true smart case.

Hardware which I've used in this project is:

Case: Custom AXE-R case by neSSa
CPU: AMD Treadripper 1950x
RAM: ADATA XPG 8x8Gb DDR4 RGB
SSD: XPG SX8000 PCIe Gen3x4 M.2
MB: Gigabyte AORUS X399 Gaming 7
GPU: Gigabyte Vega 64 CF
PSU: Cooler Master V1200 Platinum and CM 120 AP RGB fans
Cooling: EKWB full custom dual-loop water cooling system

Thank you all for support!

BR neSSa

Svaka čast dugo se čekalo ali se trud isplatio!Cekamo prezentaciju


Sent from my iPhone using Tapatalk

 

[Babadzonka]

Pa preljepo!

 

[Shang Tsung]

Brutalno u svakom smislu. Svaka cast!

 

[Kobatz]

Xtra momci,kao i uvek pokidaste od ideje. izvedbe i realizacije
Ps. Koliko kosta ovakav pisi,jel na prodaju,i jel ide garaza uz njega?


Sent from my D6603 using Tapatalk

 

[neSSa]

Hvala drugari sto primecujete i sto ste tu da podrzite ovo sto smo uradili, drzite fige da to urade i sudije!

Jos fotki...

 

[dr1pac]

Svaka čast!

 

[neSSa]

More photos