OCCT

[illidan]

jedan od kvalitetnijih programa za testiranje stabilnosti sistema

OCCT 3.0.2 Beta 3

OCCT comes from "OverClock Checking Tool". Here is a list of its features: Up to 16-core support; Customizable tests; CPU and Motherboard detection; Monitoring support through 3rd party application; Can produce graphs showing temperature and voltages during the test; Multi-language support; and much more.

Changelog (Since 3.0.0) :

GPU:MEMTEST
* Now compatible with GeForce cards with more than 512MB under Vista (A Cuda bugs was encountered, but i found a workaround)
* Now 4 times faster (thanks to a switch to Cuda 2.1 which came with bugfixes in the SDK - new prerequisites though)
* The test cannot be run on GeForce 7 or lower anymore

MONITORING
* OCCT now saves monitoring sensor based on sensor names when available, not on position in a list. Thus, when a sensor disappear, OCCT configuration is preserved
* Engine has been updated - new CPU support,...
the maximpum CPU temp can now be set at a temp higher than 99°C (before, it could be done, but it was reset upon reloading OCCT at 80°C)

DOWNLOAD!

 

[BigJoe]

2-jka bese dobra, moracu uskoro da isproam ovaj novi.

 

[activated1]

Ja sam ga probao, moze josh i da testira grafiku i napajanje, ovo za PSU mi nije najjasnije, al kaze da test vrshim na sopstvenu odogovornost :p

 

[SuperStarr]

Ovo je bolje nego Orthos?

 

[Vule]

Pa ne baš, ali je dobar, čini mi se da može malo ranije da otkrije grešku nego Orthos/Prime95, ali je ipak preporučljivo odraditi i jedno 12-15h Orthosa, jer OCCT nije 100% garant stabilnosti...

 

[FantomX]

Joj i Vule pocheo testiranje po CAR-u, kojih bre 12-15h, kud ces crnjane ako pukne drajver na 11h59min, treba se ubijesh ko siroche.
2h OCCT-a je sasvim dovoljno, kao i nekih 3-4h prime-a sa kombinacijom 3Dmark-a.

 

[Vule]

Nije. Ja probao, i ispričao ti već jedno 3 puta

 

[Kobatz]

ja to ovako...
2h 3dmark-a 06
2h everest ultlimate-a 5.0 burnin stres test
2h occt-a

+ Klima na heating max (da se stvori sto vrelija okolina)

i to sve x 20 racunara pa ako prodje prodje

 

[BigJoe]

Za testiranje satbilnosti je LinX i Intel Burn Test keva, pisacu o tome kad nadjem vremena.

 

[Kobatz]

Slazem se da je intel burn keva a to po meni generalno vazi za oc.'ed konfe a za konfe koje treba da se puste u rad i provere dali su stigle sa nechim "falichnim" mislim da je sasvim dovoljno ovo kroz sta ih ja pustam Everest je u poslednje vreme postao veci mucitelj od occt-a(dize proc-ima vecu temp).

 

[Vule]

Ajd da i ovde napišem svoje iskustvo... Imao sam neki E2180 koji je na 3.2Ghz radio super, na sad već nemam pojma kom naponu, uglavno, sve je prolazilo, 3D markovi, SuperPi, OCCT je satima vrteo, Everest, LinX, mislio sam, jelda, da je 100% stabilan. Onda sam igrao neku misiju CoH-a i pred sam kraj, BSOD. Reko, možda treba patch, drajver za VGA, ovo ono, i sve sam to izmenjao, ali je nastavilo da se dešava isto. Onda sam pred spavanje pustio Prime, kad sam se probudio primetio sam da je na drugom jezgru pronađen error nakon nekih 7 sati... Samo za jednu stavku sam podigao napon na CPU, prošao Prime nekih 15h, a CoH, kao i sve ostalo, radilo savršeno od tada pa na dalje...

 

[FantomX]

Pa bre jesam li ja gore napisao da se uz Prime/Orthos test pusti i jedno 20 loop-ova 3dMark-a.

 

[Vule]

Ne vredi, Marko je prolazio k'o od šale, jedno 4-5 sati

 

[FantomX]

Koji bre Marko, on ne zna da klokuje.

 

[Vule]

Hahahahah

 

[Oki]

Za testiranje satbilnosti je LinX i Intel Burn Test keva, pisacu o tome kad nadjem vremena.

+1

pogotovo ovo za IBT.

 

[FantomX]

Ok su Linx i IBT, skracuju vreme buljenja u ekran, nema potrebe zahebavati se sa Orthos-om i Prime-om, pustis jedno 150 loop-va Linx i gledas kako se znoji sve.

 

[CAR]

Joj i Vule pocheo testiranje po CAR-u, kojih bre 12-15h, kud ces crnjane ako pukne drajver na 11h59min, treba se ubijesh ko siroche.

Nista, pustis ponovo

Ma, zna Vule znanje, pusti njega, ti si onaj kome ne ide u glavu

 

[FantomX]

More bre kome ne ide u glavu, vrteo sam prajm i orthos po 15h, nisam bre spavao nocima sunce ti hebem, nemam srca opet da ga pustam, vraca mi ruzne uspomene.
Salim se ja malo, 12h prime-a je najbolje za test stabilnosti + par loop-ova 3dmark-a pride.

ps. sad sam odradio remote desktop na gajbu, vrti se prajmic cirka 14h i jedno 28min.

 

[illidan]

OCCT 3.1.0.b04

Changelog :
Main (OCCT GUI)

* GPU:OCCT v0.70 has been integrated !
* OCCT now detects and displays the name of your graphic card (only if it supports internal monitoring, i'm relying on CPU-Z to do this detection)
* OCCT now auto-configure the Shader complexity value based on a CSV file named "ShaderComplexity.csv" file that you can edit. First match on the GC name wins. Wildcards are supported. Edit the file, it's pretty easy to understand.
* A compatibility checking engine has been implemented, that improves OCCT's detection of your computer's compatibility with Cuda and D3D tests.

Download!

 

[serpent]

A sto mi occt koristi samo 2gb od 3gb memorije (linpack)?

 

[BigJoe]

^Ako ti je OS 32-bitan aplikacija moze maksimalno 2GB memorije da koristi.

 

[serpent]

damn ... to je to

 

[illidan]

OCCT 3.1.0.b06

* Main screen resolution will be detected when the user clicks on Fullscreen checkbox in GPU:3D and Power Supply tabs.
* SLI/Crossfire detection improved
* Translation files updates
* A sanity check has been added that verifies that the .exe tests are there, all of them. Seems an "of course", but this ensures the integroty of the download, and that the user indeed uncompress the .zip file with the folder intact.
* Help has been added on the Shader Complexity value
* The red square used to display text in the GPU:3D test has been made wider. We thus jumped to GPU:3D v0.71. Minor modification.

Download!

 

[Lukija]

OCCT 4.0.0 Beta 2

No, OCCT isn't dead, besides the ranting i get in the forums or by mail... I just have lacked a lot of time to work on it, mainly because i bought a house... and became a father !

OCCT v4 is under heavy, heavy work. It will soon reach the alpha stage, and is a major release.

It will bring notably :

* New interface written in C# 2.0
* Real-time graphs
* Tests handling improved, options simplified
* Alerts (Min/max) will be configurable per sensor, and not only for the CPU temp
* Fan monitoring

Tests themselves will be next on the line of modifications, mainly :

* Port GPU:3D to DirectX10 or 11
* Redo the GPU:Mem test i'm not happy with
* Update CPU:Linpack

Please wait a little, and all that will be available

Thanks for your understanding !