madVR

[peja81]

v0.81

* added automatic exception catching functionality
* added manual freeze report functionality (press Ctrl+Alt+Shift+Break)
* added option to switch display mode only when media player is in fullscreen
* added option to restore display mode when media player leaves fullscreen
* display mode changer now reacts on film (24p) vs. video (60p) content type
* improved renderer behaviour when display mode changes
* improved ivtc: faster detection of cadence changes
* improved ivtc: more robust against compression artifacts
* deint + ivtc is now auto activated for 60i movies which are tagged to 24 Hz
* ivtc is now auto activated for 50i movies which are tagged to 25 or 24 Hz
* deinterlacing is only turned on for 50i and 60i movies now
* added patch to MS VC-1 decoder -> deinterlacing off
* modified file name tagging logic (24p, 24i, 24fps, 24Hz, etc)
* improved behaviour with decoders which don't output proper interlaced flags
* improved exclusive -> windowed mode behaviour slightly, mainly for ZoomPlayer
* added "sharpness: 100" option for Bicubic scaling
* queue sizes are now always 16/8 by default, no more automatic adjustments
* keyboard shortcuts: always only change things temporarily by default now
* keyboard shortcuts: some changes (not all) can be stored by pressing F2 now
* the source levels (TV vs PC) can be stored now
* the source content type (film vs video) can be stored now
* key presses are now only "swallowed" if media player process has key focus
* osd keyboard handling runs in its own thread now
* added many more languages to the "Pause" MPC-HC message block
* used GPU RAM is now not shown in osd, anymore
* increased upload thread priority slightly
* fixed: ZoomPlayer eventually froze when leaving exclusive mode
* fixed: some users had composition rate in exclusive mode OSD -> problems
* fixed: crash when video window size was reduced to a very small size
* fixed: frame stepping sometimes resulted in weird play/pause mixed state
* fixed: one case where "delay playback start..." resulted in paused state
* fixed: v210 pitch/stride handling was broken
* fixed: YV24 had swapped chroma channels
* fixed: YV24 DXVA deinterlacing resulted in image corruption
* fixed: OSD API didn't capture mouse events on mouse down

http://madshi.net/madVR.zip

 

[ZoNi]

A jel postoji "portabl" verzija, tj. nešto kao neki DLL koji bi se ubacio u folder plejera, i da onda plejer automatski koristi ovaj dekoder (ili šta je već)?

 

[peja81]

Portabl je u smislu da njegov folder možeš slobodno prebacivati sa jednog kompa na drugi, ali na svakom kompu madvr.ax filter mora biti registrovan u Windowsu.

 

[ZoNi]

Hm... Ovde sam video nešto da se pominje portabl madvr i portabl PotPlayer, pa da se izmenom u INI-ju može naterati korišćenje te portabl verzije... ako je Google dobro preveo

http://www.portableappc.com/music-video/potplayer-portable/ (Google prevod)

***

Napredno podešavanje MPC-HC, zajedno sa madVR:
http://www.avsforum.com/avs-vb/showthread.php?t=1357375

***

How to Watch Videos Using Madvr High Quality Video Renderer With Media Player Classic Home Cinema
http://www.wikihow.com/Watch-Videos-Using-Madvr-High-Quality-Video-Renderer-With-Media-Player-Classic---Home-Cinema

Info: saving snapshots from within Media Player Classic - Home Cinema when rendering with madVR doesn't work

 

[peja81]

v0.82.1

* added: new option to activate deinterlacing if in doubt whether it's needed
* added: new IVTC option to only look at pixels in the frame center
* added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
* deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
* improved IVTC cadence logic
* improved DXVA deinterlacing behaviour slightly
* improved display mode change event handling
* improved exclusive -> windowed switch a little bit more
* fixed: madVR sometimes didn't notice changed display mode
* fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
* fixed: crash when moving madVR to another display with ZoomPlayer
* fixed: freeze when switching subtitles in paused state
* fixed: closing down madVR didn't always wait for the closing to complete
* fixed: closing the media player while madVR was in exclusive mode -> freeze
* fixed: sometimes asking for a freeze report created multiple reports at once
* fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
* fixed: when switching from Bicubic to SoftCubic, options weren't updated
* fixed: red error messages were supposed to disappear after a while but didn't
* fixed: red error messages no longer show duplicate error messages

 

[darth zool]

madVR v0.82.2 released

* fixed: SoftCubic was stuck on "softness: 50" (introduced in v0.82)
* fixed: in certain situations there was a new freeze (introduced in v0.82)
* fixed: PotPlayer crashed sometimes when turning audio processing on/off
* fixed: option "if in doubt activate deinterlacing" didn't work properly

madVR v0.82.3 released

* fixed: Ctrl+C / File Close didn't work in MPC-HC  (introduced in v0.82)
* fixed: Ctrl+E in MPC-HC didn't work  (introduced in v0.82)
* fixed: finalization crash due to stupid bug  (introduced in v0.82)

:zvizdim:

 

[peja81]

v.0.82.4

* fixed: 2 more finalization crashes
* fixed: display mode changer stopped working after a 2nd video file was loaded
* fixed: filter properties dialog didn't show the full madVR version number

 

[gx-x]

kako da instaliram ovaj novi preko starog 0.80? Iskopirao sam sve iz arhive preko starog i pokrenuo install.bat, pokrenuo neki film i kad odem na filter: madVR pise da je i dalje 0.80 ?!

 

[Kobatz]

Tako kako si ti uradio i ja sam uradio i meni se promenila verzija

 

[gx-x]

pffff...meni nije....bar ne pise da jeste

 

[peja81]

Deinstaliraj madvr (pokreni uninstall.bat kao admin (a možda i ne mora) iz foldera u kome se nalazi), nakon toga ekstrahuj fajlove nove verzije na isto mesto i onda pokreni instalaciju.
Ja uvek obrišem sve fajlove stare verzije iz tog foldera pre nego što instaliram novu.

 

[Lukija]

Da li neko moze da uradi screenshot slike kada se koristi madVR i recimo Custom EVR? Juce sam probao MPC-HC sa madVR i probao sam PotPlayer sa CustomEVR na par video snimaka i nisam primetio neku razliku. Za MPC-HC sam siguran da koristi madVR, nisam menjao nista od podesavanja.

 

[c-p-r]

Ja sam se isto zezao sa tim ranije i razlika koju sam primetio je skoro nikakva, a sve sam uporedjivao na 720p i 1080p rezolucijama. Nesto sam bio u tripu da mi je manje primetna zbog monitora ali eto ti imas IPS.

Bilo bi fino da postavite neke shotove poredjenja.

 

[ZoNi]

Ja sam se isto zezao sa tim ranije i razlika koju sam primetio je skoro nikakva

http://www.pcaxe.com/forum/showthread.php?p=199257#post199257

 

[c-p-r]

Da da, video sam to. Opet meni je na desktopu, na TN panelu starom par godina. A evo i Lukija nije primetio razliku a ima IPS.

 

[gx-x]

ja sam primetio razliku, primarno u konverziji 0-255 i sinhronizaciji slike sa refreshom, fluidnije je, pogotovo na onim sugavim 23/24p filmovima (23 do 24 fps). E sad, treba to i malo podesvati. Ne znam kako neki ne vide razliku kad i sama madVR podesavanja prave razliku u korscinju madVR-a ? Negde se manje vidi, negde vise, zavisi od videa koji gledas. Generalno, kad se podesi sve, konverzija izmedju formata kolorita video zapisa na format izlaznog uredjaja je bolja. Kao sto rekoh, nekad se to primeti vise, nekad manje, a nekad sve izgleda kao da si digao saturaciju za 10% na nekim bojama, nekad obrnuto. Probacu da uhvatim screenshote sa nekim konkretnijim razlikama.

edit: evo ga: print screen pa paste u photoshop pa save as jpg maximum quality. Poredio sam screenshote sa prikazom u plejeru i isti su.

EVR custom preset

MadVR

madVR podesen, oni filteri nisu spline vec opcija pre, volim ostriju sliku
drugi je EVR custom preset

 

[gx-x]

ovako, poredjenje iz prethodnog posta nije bas fer jer je madVR iz MPC-HC, a EVR CP iz potplejera + u MPCHC koristim ffdshow raw video filter i deringer u njemu, a to kanda dosta znaci ili je PP prosto inferioran u odnosu na MPCHC posto ovako izgleda MPCHC EVR CP:

dakle pedu i oko u odnosu na PP

elem, i dalje se vidi da je boja lica drugacija na madVR, da je manje suma, da je manje bendinga i td.

 

[Lukija]

Hm, zanimljivo. madVR izgleda lepse u smislu manje artefakata ali recimo na kaputu (ili sta vec) se gube neki detalji.

 

[Kobatz]

I meni se cini da zavisi od filma(negde se vise primeti a negde ne toliko) ali u svakom slucaju smo ja i gledaoci zadovoljni
Prvenstveno je zivopisnija slika(kolorit)...

 

[gx-x]

evo ovde se lepo vidi, otvorite svaku u svoj tab pa smenjujte:

madVR: http://i.imgur.com/ZX2jd.jpg
evrCP: http://i.imgur.com/eFD0D.jpg

Moze madVR da se namesti da ima ostriju sliku, moze kako oces, u tome i jeste caka. Meni su prosto boje zivlje i prirodnije. Na primeru gore, kad prebacis sa EVR CP na madVR sunce prosto "sine" u odnosu na EVR, lepse je, malko mutnije na nekim mestima ali na nekima je podjednako ostro, valjda zavisi od podesavanja algoritma, a to sve ima objasnjeno detaljno u linku za podesavanje madVR kojis am ostavio u poslednjem postu u PotPlejer temi.

Takodje, napominjem, madVR je fluidniji od ostalih renderer-a, kao da ima vise fps, ne znam kako da objasnim...kao da bolje radi sync izmedju fps filma i refresh rate-a, manje preskoka i sl.

edit @Lukija: Pogledaj boju lica na onom tipu, ne moras ni uvelicavati slike Razlika deluje kao suptilna ali je ipak razlika. Onda kad imas brdo tih nekih suptilnih razlika u pokretu sve vreme to i nije vise tako suptilno

E sad, zasto je u PP-u onako ruzna slika - nemam pojma. Ono je sve default u PP, MPC-HC koristi LAV video i ffdshow audio i raw video (zbog deringera). Mozda je do LAV filtera ne znam, ali je razlika veoma primetna cak i dok ide film.

 

[ZoNi]

madVR: http://i.imgur.com/ZX2jd.jpg
evrCP: http://i.imgur.com/eFD0D.jpg

Od ove dve slike, meni lepše deluje evrcp. Mada, razlika postoji samo kad se zagleda i ne bi bila vredna objašnjavanja nekome (noobu, npr), kako da je podesi.

Iskreno, ovo me podseća na audiofilske priče, pa je možda bolje da ja napustim ovu temu

 

[gx-x]

brate, kod mene se i te kako vidi razlika, ono, kao dve drugacije slike su, ne znam kako da ti objasnim...jedino da prebacim u dithered gif

edit: evo...valjda ti taj krs prikazuje bar 256 boja Ako ti se ni ovde nista ne menja onda definitivno nabavi drugi ekran/laptop stagod

 

[peja81]

v0.82.5

* improved D3D11 exclusive -> windowed switch slightly, still not great, though
* option "delay playback start..." now requires both GPU+CPU queues to be full
* fixed: YCgCo decoding matrix was not correct
* fixed: internal 4:4:4 decoding produced wrong colors (introduced in v0.81)
* fixed: display mode changer didn't always activate when entering fullscreen
* fixed: forcing deinterlacing + IVTC on was caused by 30p tag instead of 24p
* fixed: h264 media type parsing sometimes crashed
* fixed: crash when no filter in the chain provided frame rate information
* fixed: one thread was started per video frame (introduced in v0.82)
* maybe fixed: entering/leaving exclusive mode steals keyboard focus

 

[gx-x]

jos samo da napravi da mozes da pustis dvd ili BR i eto radosti. Ovako, svaki put kad ocu da pustim neki BR ili DVD moram da menjam na EVR (ovo je samo na windowsu 7 problem)

 

[mINUS]

i meni je lepsi evrCP od ona dva primera, boja trave je zelenija i slika ima vise detalja, zbog boljeg sharpnesa ima i vise shuma, ali se meni to licno vise dopada.

madVR je zazutio sliku, nije ni cudo sto imas utisak da je sunce "zivnulo" i malo mu ga dao po blur-u

u sustini jako slicno, i nijanse su u pitanju