illidan
PCAXE Addicted
- Učlanjen(a)
- 01.04.2009.
- Poruka
- 7.117
- Rezultat reagovanja
- 3.843
Moja konfiguracija
Black, Stainless and cursed quietly!
The package itself allows the proud owners in advance to look at the new fans, as the 80mm, 92mm or 120mm version in the trade. The design of the packaging was in the typical look BeQuiet held, which can be a lot of black and white out. Nevertheless, the product is in our opinion, never stale.
After the quick and fortunately very easy unpacking is the object of desire to install in your PC ready. It revealed to the user in addition to the black fan on the fan also mounted anti-vibration elements, fixing a total of five pins, a 12V/7V power adapter and a 3-pin to 4-pin adapter. A description of how the fan can be installed on the inside is to be found.
Specifications:
Size: 80x80x25mm
Speed: 2000 rpm
Volume: 15 dB (A)
Airflow: 44.17 m³ / h
Connector: 3-pin Molex
Size: 92x92x25mm
Speed: 1800 rpm
Volume: 16 dB (A)
Airflow: 55.39 m³ / h
Connector: 3-pin Molex
Size: 120x120x25mm
Speed: 1500 rpm
Volume: 17 dB (A)
Airflow: 85.80 m³ / h
Connector: 3-pin Molex
Under the hood is the storage technology, "Fluid Dynamic Bearing (FDB), whereby the fan according to the manufacturer's service completely silent performance. The camp itself was made of copper and thus provides a significantly better removal of the resulting waste heat when operating than conventional fans. Indeed, for many fans next to the air often the camp to hear what a poor processing quality when mostly grinding, humming or even chatter is perceiving. The promises made by be quiet also aroused our interest here, because so far in almost every fan camp more or less was heard.
After installing the fan, we have an independent controller (Fan-O-Matic Professional) and the running test. At 12V, the fan, individually and on the back of the test system with an almost imperceptible noise convincing. Only from 20-30cm is the subjectively perceived airflow. By reducing power to 7.0 volts and 5.0 volts, we then absolute silence, where even a very short distance from virtually nothing was perceptible.
The real surprise, however, followed the test voltage. We have the fans continuously during normal operation the voltage robbed. Here we came to the lowest values we have measured so far. Subsequently, the start voltage is measured, which we of 1.0 volts from the voltage in 0.1 volt steps, have increased. It was any tension between increasing the power off and ensured that the fan blades showed no movement. They were all three fans with a starting voltage from 2.3 to 3.0 volts surprise, which is also well suited to running. Following the measured starting voltage.
120x120x25mm: 3.0 V
92x92x25mm: 2.5 V
80x80x25mm: 2.3 V
For comparison, made it a 120mm Papst 4412 F/2GL only at 4.8 volts and the famous Noctua NF-P12 only at 6.0 V to start. Course must also be mentioned here that when fans always some form of the series are scattering. The test results are therefore only available to us on the fan no doubt apply. Nor is the perception of sounds from person to person very differently.
The cable length is 45cm sufficient for most applications, with the cable through the cable protection (Sleeve) very good move, and the processing of the fan is also under closer scrutiny is not objectionable. Overall, the fans act like a cast, sharp or dirty places, we were able to test our specimens was not found.
The fans are depending on the size of 13,50 Euro to 15,90 Euro from 08th Be available in July.
tekst je preveden sa nemackog preko google translate
Izvor: technic3d.com
The package itself allows the proud owners in advance to look at the new fans, as the 80mm, 92mm or 120mm version in the trade. The design of the packaging was in the typical look BeQuiet held, which can be a lot of black and white out. Nevertheless, the product is in our opinion, never stale.
After the quick and fortunately very easy unpacking is the object of desire to install in your PC ready. It revealed to the user in addition to the black fan on the fan also mounted anti-vibration elements, fixing a total of five pins, a 12V/7V power adapter and a 3-pin to 4-pin adapter. A description of how the fan can be installed on the inside is to be found.
Specifications:
Size: 80x80x25mm
Speed: 2000 rpm
Volume: 15 dB (A)
Airflow: 44.17 m³ / h
Connector: 3-pin Molex
Size: 92x92x25mm
Speed: 1800 rpm
Volume: 16 dB (A)
Airflow: 55.39 m³ / h
Connector: 3-pin Molex
Size: 120x120x25mm
Speed: 1500 rpm
Volume: 17 dB (A)
Airflow: 85.80 m³ / h
Connector: 3-pin Molex
Under the hood is the storage technology, "Fluid Dynamic Bearing (FDB), whereby the fan according to the manufacturer's service completely silent performance. The camp itself was made of copper and thus provides a significantly better removal of the resulting waste heat when operating than conventional fans. Indeed, for many fans next to the air often the camp to hear what a poor processing quality when mostly grinding, humming or even chatter is perceiving. The promises made by be quiet also aroused our interest here, because so far in almost every fan camp more or less was heard.
After installing the fan, we have an independent controller (Fan-O-Matic Professional) and the running test. At 12V, the fan, individually and on the back of the test system with an almost imperceptible noise convincing. Only from 20-30cm is the subjectively perceived airflow. By reducing power to 7.0 volts and 5.0 volts, we then absolute silence, where even a very short distance from virtually nothing was perceptible.
The real surprise, however, followed the test voltage. We have the fans continuously during normal operation the voltage robbed. Here we came to the lowest values we have measured so far. Subsequently, the start voltage is measured, which we of 1.0 volts from the voltage in 0.1 volt steps, have increased. It was any tension between increasing the power off and ensured that the fan blades showed no movement. They were all three fans with a starting voltage from 2.3 to 3.0 volts surprise, which is also well suited to running. Following the measured starting voltage.
120x120x25mm: 3.0 V
92x92x25mm: 2.5 V
80x80x25mm: 2.3 V
For comparison, made it a 120mm Papst 4412 F/2GL only at 4.8 volts and the famous Noctua NF-P12 only at 6.0 V to start. Course must also be mentioned here that when fans always some form of the series are scattering. The test results are therefore only available to us on the fan no doubt apply. Nor is the perception of sounds from person to person very differently.
The cable length is 45cm sufficient for most applications, with the cable through the cable protection (Sleeve) very good move, and the processing of the fan is also under closer scrutiny is not objectionable. Overall, the fans act like a cast, sharp or dirty places, we were able to test our specimens was not found.
The fans are depending on the size of 13,50 Euro to 15,90 Euro from 08th Be available in July.
tekst je preveden sa nemackog preko google translate
Izvor: technic3d.com
sta mislish o gore pomenutim ventovima ?