Cruicial M4 BSOD

[Lukija]

I Crucial se pridruzio klubu.

The update is supposed to fix a firmware bug that is causing the BSODs after about 5000 hours of active use. The BSODs are not random and occur roughly every hour, which definitely affects productivity. Luckily, the data on the SSD remains unaffected.

http://www.anandtech.com/show/5308/crucial-to-fix-m4-bsod-issue-in-two-weeks

 

[FantomX]

Obicna flash memorija...

 

[Apple]

^@Fantom sta si mislio pod tim : "obicna flash memorija "
Sva sreca pa nemam tih zez. . za Intelom

 

[Lukija]

Nije ni Intel zuto cvece i imao je problema sa FW. U pitanju je 320 serija:

http://pcper.com/news/Storage/Intel-reproduces-8MB-bug-fix-coming-soon

Ni 510 nije bez mana:

http://communities.intel.com/thread/23997?start=0&tstart=0


I za Crucial se mislilo da je savrsen ali eto nije. Bug-ovi u FW ocigledno nisu nista cudno, patili su i HDD-ovi od toga sada SSD-ovi. Samo je pitanje kada ce koji da ispliva i koliko ce brzo biti potrebno da se zakrpi problem.

 

[Beagle]

Bitno je da ne dodje do gubitka podataka. Te gluposti su normalne i uvek prate novu tehnologiju (a realno, SSD je i dalje beba u poredjenju sa hard diskovima). Vazno je da se greske ispravljaju.

 

[Lukija]

I vec je izasao firmware koji bi trebalo da resi problem. Prilicno brza reakcija i primer ostalima:

Release Date: 01/13/2012
Change Log:

Changes made in version 0002 (m4 can be updated to revision 0309 directly from either revision 0001, 0002, or 0009)
Correct a condition where an incorrect response to a SMART counter will cause the m4 drive to become unresponsive after 5184 hours of Power-on time. The drive will recover after a power cycle, however, this failure will repeat once per hour after reaching this point. The condition will allow the end user to successfully update firmware, and poses no risk to user or system data stored on the drive.

This firmware update is STRONGLY RECOMMENDED for drives in the field. Although the failure mode due to the SMART Power On Hours counter poses no risk to saved user data, the failure mode can become repetitive, and pose a nuisance to the end user. If the end user has not yet observed this failure mode, this update is required to prevent it from happening.

If you are using a SAS Expander please do not download this Firmware. As soon as we have a Firmware Update that will work in these applications we will release it.

http://www.crucial.com/support/firmware.aspx

 

[peja81]

Svaka čast Crucialu, to se zove efikasnost.